Location

Constant used to specify formatting of a latitude or longitude in the form "[+-]DDD.DDDDD where D indicates degrees.

Constant used to specify formatting of a latitude or longitude in the form "[+-]DDD:MM.MMMMM" where D indicates degrees and M indicates minutes of arc (1 minute = 1/60th of a degree).

Constant used to specify formatting of a latitude or longitude in the form "DDD:MM:SS.SSSSS" where D indicates degrees, M indicates minutes of arc, and S indicates seconds of arc (1 minute = 1/60th of a degree, 1 second = 1/3600th of a degree).

Construct a new Location with a named provider.

By default time, latitude and longitude are 0, and the location has no bearing, altitude, speed, accuracy or extras.

Construct a new Location object that is copied from an existing one.

Returns the approximate initial bearing in degrees East of true North when traveling along the shortest path between this location and the given location. The shortest path is defined using the WGS84 ellipsoid. Locations that are (nearly) antipodal may produce meaningless results.

Converts a String in one of the formats described by FORMAT_DEGREES, FORMAT_MINUTES, or FORMAT_SECONDS into a double.

Converts a coordinate to a String representation. The outputType may be one of FORMAT_DEGREES, FORMAT_MINUTES, or FORMAT_SECONDS. The coordinate must be a valid double between -180.0 and 180.0.

Describe the kinds of special objects contained in this Parcelable's marshalled representation.

Computes the approximate distance in meters between two locations, and optionally the initial and final bearings of the shortest path between them. Distance and bearing are defined using the WGS84 ellipsoid.

The computed distance is stored in results[0]. If results has length 2 or greater, the initial bearing is stored in results[1]. If results has length 3 or greater, the final bearing is stored in results[2].

Returns the approximate distance in meters between this location and the given location. Distance is defined using the WGS84 ellipsoid.

Get the estimated accuracy of this location, in meters.

We define accuracy as the radius of 68% confidence. In other words, if you draw a circle centered at this location's latitude and longitude, and with a radius equal to the accuracy, then there is a 68% probability that the true location is inside the circle.

In statistical terms, it is assumed that location errors are random with a normal distribution, so the 68% confidence circle represents one standard deviation. Note that in practice, location errors do not always follow such a simple distribution.

This accuracy estimation is only concerned with horizontal accuracy, and does not indicate the accuracy of bearing, velocity or altitude if those are included in this Location.

If this location does not have an accuracy, then 0.0 is returned. All locations generated by the LocationManager include an accuracy.

Get the altitude if available, in meters above sea level.

If this location does not have an altitude then 0.0 is returned.

Get the bearing, in degrees.

Bearing is the horizontal direction of travel of this device, and is not related to the device orientation. It is guaranteed to be in the range (0.0, 360.0] if the device has a bearing.

If this location does not have a bearing then 0.0 is returned.

Return the time of this fix, in elapsed real-time since system boot.

This value can be reliably compared to elapsedRealtimeNanos(), to calculate the age of a fix and to compare Location fixes. This is reliable because elapsed real-time is guaranteed monotonic for each system boot and continues to increment even when the system is in deep sleep (unlike getTime().

All locations generated by the LocationManager are guaranteed to have a valid elapsed real-time.

Returns additional provider-specific information about the location fix as a Bundle. The keys and values are determined by the provider. If no additional information is available, null is returned.

A number of common key/value pairs are listed below. Providers that use any of the keys on this list must provide the corresponding value as described below.

• satellites - the number of satellites used to derive the fix

Get the latitude, in degrees.

All locations generated by the LocationManager will have a valid latitude.

Get the longitude, in degrees.

All locations generated by the LocationManager will have a valid longitude.

Returns the name of the provider that generated this fix.

Get the speed if it is available, in meters/second over ground.

If this location does not have a speed then 0.0 is returned.

Return the UTC time of this fix, in milliseconds since January 1, 1970.

Note that the UTC time on a device is not monotonic: it can jump forwards or backwards unpredictably. So always use getElapsedRealtimeNanos() when calculating time deltas.

On the other hand, getTime() is useful for presenting a human readable time to the user, or for carefully comparing location fixes across reboot or across devices.

All locations generated by the LocationManager are guaranteed to have a valid UTC time, however remember that the system time may have changed since the location was generated.

True if this location has an accuracy.

All locations generated by the LocationManager have an accuracy.

True if this location has an altitude.

True if this location has a bearing.

True if this location has a speed.

Returns true if the Location came from a mock provider.

Remove the accuracy from this location.

Following this call hasAccuracy() will return false, and getAccuracy() will return 0.0.

Remove the altitude from this location.

Following this call hasAltitude() will return false, and getAltitude() will return 0.0.

Remove the bearing from this location.

Following this call hasBearing() will return false, and getBearing() will return 0.0.

Remove the speed from this location.

Following this call hasSpeed() will return false, and getSpeed() will return 0.0.

Clears the contents of the location.

Sets the contents of the location to the values from the given location.

Set the estimated accuracy of this location, meters.

See getAccuracy() for the definition of accuracy.

Following this call hasAccuracy() will return true.

Set the altitude, in meters above sea level.

Following this call hasAltitude() will return true.

Set the bearing, in degrees.

Bearing is the horizontal direction of travel of this device, and is not related to the device orientation.

The input will be wrapped into the range (0.0, 360.0].

Set the time of this fix, in elapsed real-time since system boot.

Sets the extra information associated with this fix to the given Bundle.

Set the latitude, in degrees.

Set the longitude, in degrees.

Sets the name of the provider that generated this fix.

Set the speed, in meters/second over ground.

Following this call hasSpeed() will return true.

Set the UTC time of this fix, in milliseconds since January 1, 1970.

Returns a string containing a concise, human-readable description of this object. Subclasses are encouraged to override this method and provide an implementation that takes into account the object's type and data. The default implementation is equivalent to the following expression:

   getClass().getName() + '@' + Integer.toHexString(hashCode())

See Writing a useful toString method if you intend implementing your own toString method.

Flatten this object in to a Parcel.