Bitmap

Indicates that the bitmap was created for an unknown pixel density.

Write a compressed version of the bitmap to the specified outputstream. If this returns true, the bitmap can be reconstructed by passing a corresponding inputstream to BitmapFactory.decodeStream(). Note: not all Formats support all bitmap configs directly, so it is possible that the returned bitmap from BitmapFactory could be in a different bitdepth, and/or may have lost per-pixel alpha (e.g. JPEG only supports opaque pixels).

Tries to make a new bitmap based on the dimensions of this bitmap, setting the new bitmap's config to the one specified, and then copying this bitmap's pixels into the new bitmap. If the conversion is not supported, or the allocator fails, then this returns NULL. The returned bitmap initially has the same density as the original.

Copy the pixels from the buffer, beginning at the current position, overwriting the bitmap's pixels. The data in the buffer is not changed in any way (unlike setPixels(), which converts from unpremultipled 32bit to whatever the bitmap's native format is.

After this method returns, the current position of the buffer is updated: the position is incremented by the number of elements read from the buffer. If you need to read the bitmap from the buffer again you must first rewind the buffer.

Copy the bitmap's pixels into the specified buffer (allocated by the caller). An exception is thrown if the buffer is not large enough to hold all of the pixels (taking into account the number of bytes per pixel) or if the Buffer subclass is not one of the support types (ByteBuffer, ShortBuffer, IntBuffer).

The content of the bitmap is copied into the buffer as-is. This means that if this bitmap stores its pixels pre-multiplied (see isPremultiplied(), the values in the buffer will also be pre-multiplied.

After this method returns, the current position of the buffer is updated: the position is incremented by the number of elements written in the buffer.

Returns a immutable bitmap with the specified width and height, with each pixel value set to the corresponding value in the colors array. Its initial density is determined from the given DisplayMetrics.

Returns a immutable bitmap with the specified width and height, with each pixel value set to the corresponding value in the colors array. Its initial density is determined from the given DisplayMetrics.

Returns an immutable bitmap from the specified subset of the source bitmap. The new bitmap may be the same object as source, or a copy may have been made. It is initialized with the same density as the original bitmap.

Returns an immutable bitmap from the source bitmap. The new bitmap may be the same object as source, or a copy may have been made. It is initialized with the same density as the original bitmap.

Returns a mutable bitmap with the specified width and height. Its initial density is determined from the given DisplayMetrics.

Returns an immutable bitmap from subset of the source bitmap, transformed by the optional matrix. The new bitmap may be the same object as source, or a copy may have been made. It is initialized with the same density as the original bitmap. If the source bitmap is immutable and the requested subset is the same as the source bitmap itself, then the source bitmap is returned and no new bitmap is created.

Returns a mutable bitmap with the specified width and height. Its initial density is as per getDensity().

Returns a immutable bitmap with the specified width and height, with each pixel value set to the corresponding value in the colors array. Its initial density is as per getDensity().

Returns a immutable bitmap with the specified width and height, with each pixel value set to the corresponding value in the colors array. Its initial density is as per getDensity().

Creates a new bitmap, scaled from an existing bitmap, when possible. If the specified width and height are the same as the current width and height of the source bitmap, the source bitmap is returned and no new bitmap is created.

No special parcel contents.

Fills the bitmap's pixels with the specified Color.

Returns a new bitmap that captures the alpha values of the original. This may be drawn with Canvas.drawBitmap(), where the color(s) will be taken from the paint that is passed to the draw call.

Returns a new bitmap that captures the alpha values of the original. These values may be affected by the optional Paint parameter, which can contain its own alpha, and may also contain a MaskFilter which could change the actual dimensions of the resulting bitmap (e.g. a blur maskfilter might enlarge the resulting bitmap). If offsetXY is not null, it returns the amount to offset the returned bitmap so that it will logically align with the original. For example, if the paint contains a blur of radius 2, then offsetXY[] would contains -2, -2, so that drawing the alpha bitmap offset by (-2, -2) and then drawing the original would result in the blur visually aligning with the original.

The initial density of the returned bitmap is the same as the original's.

Returns the size of the allocated memory used to store this bitmap's pixels.

This can be larger than the result of getByteCount() if a bitmap is reused to decode other bitmaps of smaller size, or by manual reconfiguration. See reconfigure(int, int, Config), setWidth(int), setHeight(int), setConfig(Bitmap.Config), and BitmapFactory.Options.inBitmap. If a bitmap is not modified in this way, this value will be the same as that returned by getByteCount().

This value will not change over the lifetime of a Bitmap.

Returns the minimum number of bytes that can be used to store this bitmap's pixels.

As of KITKAT, the result of this method can no longer be used to determine memory usage of a bitmap. See getAllocationByteCount().

If the bitmap's internal config is in one of the public formats, return that config, otherwise return null.

Returns the density for this bitmap.

The default density is the same density as the current display, unless the current application does not support different screen densities in which case it is DENSITY_DEFAULT. Note that compatibility mode is determined by the application that was initially loaded into a process -- applications that share the same process should all have the same compatibility, or ensure they explicitly set the density of their bitmaps appropriately.

Returns the generation ID of this bitmap. The generation ID changes whenever the bitmap is modified. This can be used as an efficient way to check if a bitmap has changed.

Returns the bitmap's height

Returns an optional array of private data, used by the UI system for some bitmaps. Not intended to be called by applications.

Returns the Color at the specified location. Throws an exception if x or y are out of bounds (negative or >= to the width or height respectively). The returned color is a non-premultiplied ARGB value.

Returns in pixels[] a copy of the data in the bitmap. Each value is a packed int representing a Color. The stride parameter allows the caller to allow for gaps in the returned pixels array between rows. For normal packed results, just pass width for the stride value. The returned colors are non-premultiplied ARGB values.

Return the number of bytes between rows in the bitmap's pixels. Note that this refers to the pixels as stored natively by the bitmap. If you call getPixels() or setPixels(), then the pixels are uniformly treated as 32bit values, packed according to the Color class.

As of KITKAT, this method should not be used to calculate the memory usage of the bitmap. Instead, see getAllocationByteCount().

Convenience for calling getScaledHeight(int) with the target density of the given DisplayMetrics.

Convenience method that returns the height of this bitmap divided by the density scale factor.

Convenience for calling getScaledHeight(int) with the target density of the given Canvas.

Convenience method that returns the width of this bitmap divided by the density scale factor.

Convenience for calling getScaledWidth(int) with the target density of the given DisplayMetrics.

Convenience for calling getScaledWidth(int) with the target density of the given Canvas.

Returns the bitmap's width

Returns true if the bitmap's config supports per-pixel alpha, and if the pixels may contain non-opaque alpha values. For some configs, this is always false (e.g. RGB_565), since they do not support per-pixel alpha. However, for configs that do, the bitmap may be flagged to be known that all of its pixels are opaque. In this case hasAlpha() will also return false. If a config such as ARGB_8888 is not so flagged, it will return true by default.

Indicates whether the renderer responsible for drawing this bitmap should attempt to use mipmaps when this bitmap is drawn scaled down. If you know that you are going to draw this bitmap at less than 50% of its original size, you may be able to obtain a higher quality This property is only a suggestion that can be ignored by the renderer. It is not guaranteed to have any effect.

Returns true if the bitmap is marked as mutable (i.e. can be drawn into)

Indicates whether pixels stored in this bitmaps are stored pre-multiplied. When a pixel is pre-multiplied, the RGB components have been multiplied by the alpha component. For instance, if the original color is a 50% translucent red (128, 255, 0, 0), the pre-multiplied form is (128, 128, 0, 0).

This method always returns false if getConfig() is RGB_565.

This method only returns true if hasAlpha() returns true. A bitmap with no alpha channel can be used both as a pre-multiplied and as a non pre-multiplied bitmap.

Only pre-multiplied bitmaps may be drawn by the view system or Canvas. If a non-pre-multiplied bitmap with an alpha channel is drawn to a Canvas, a RuntimeException will be thrown.

Returns true if this bitmap has been recycled. If so, then it is an error to try to access its pixels, and the bitmap will not draw.

Rebuilds any caches associated with the bitmap that are used for drawing it. In the case of purgeable bitmaps, this call will attempt to ensure that the pixels have been decoded. If this is called on more than one bitmap in sequence, the priority is given in LRU order (i.e. the last bitmap called will be given highest priority). For bitmaps with no associated caches, this call is effectively a no-op, and therefore is harmless.

Modifies the bitmap to have a specified width, height, and Bitmap.Config, without affecting the underlying allocation backing the bitmap. Bitmap pixel data is not re-initialized for the new configuration.

This method can be used to avoid allocating a new bitmap, instead reusing an existing bitmap's allocation for a new configuration of equal or lesser size. If the Bitmap's allocation isn't large enough to support the new configuration, an IllegalArgumentException will be thrown and the bitmap will not be modified.

The result of getByteCount() will reflect the new configuration, while getAllocationByteCount() will reflect that of the initial configuration.

WARNING: This method should NOT be called on a bitmap currently used by the view system. It does not make guarantees about how the underlying pixel buffer is remapped to the new config, just that the allocation is reused. Additionally, the view system does not account for bitmap properties being modifying during use, e.g. while attached to drawables.

Free the native object associated with this bitmap, and clear the reference to the pixel data. This will not free the pixel data synchronously; it simply allows it to be garbage collected if there are no other references. The bitmap is marked as "dead", meaning it will throw an exception if getPixels() or setPixels() is called, and will draw nothing. This operation cannot be reversed, so it should only be called if you are sure there are no further uses for the bitmap. This is an advanced call, and normally need not be called, since the normal GC process will free up this memory when there are no more references to this bitmap.

Given another bitmap, return true if it has the same dimensions, config, and pixel data as this bitmap. If any of those differ, return false. If other is null, return false.

Convenience method for calling reconfigure(int, int, Config) with the current height and width.

WARNING: this method should not be used on bitmaps currently used by the view system, see reconfigure(int, int, Config) for more details.

Specifies the density for this bitmap. When the bitmap is drawn to a Canvas that also has a density, it will be scaled appropriately.

Tell the bitmap if all of the pixels are known to be opaque (false) or if some of the pixels may contain non-opaque alpha values (true). Note, for some configs (e.g. RGB_565) this call is ignored, since it does not support per-pixel alpha values. This is meant as a drawing hint, as in some cases a bitmap that is known to be opaque can take a faster drawing case than one that may have non-opaque per-pixel alpha values.

Set a hint for the renderer responsible for drawing this bitmap indicating that it should attempt to use mipmaps when this bitmap is drawn scaled down. If you know that you are going to draw this bitmap at less than 50% of its original size, you may be able to obtain a higher quality by turning this property on. Note that if the renderer respects this hint it might have to allocate extra memory to hold the mipmap levels for this bitmap. This property is only a suggestion that can be ignored by the renderer. It is not guaranteed to have any effect.

Convenience method for calling reconfigure(int, int, Config) with the current width and config.

WARNING: this method should not be used on bitmaps currently used by the view system, see reconfigure(int, int, Config) for more details.

Write the specified Color into the bitmap (assuming it is mutable) at the x,y coordinate. The color must be a non-premultiplied ARGB value.

Replace pixels in the bitmap with the colors in the array. Each element in the array is a packed int prepresenting a non-premultiplied ARGB Color.

Sets whether the bitmap should treat its data as pre-multiplied.

Bitmaps are always treated as pre-multiplied by the view system and Canvas for performance reasons. Storing un-pre-multiplied data in a Bitmap (through setPixel(int, int, int), setPixels(int[], int, int, int, int, int, int), or BitmapFactory.Options.inPremultiplied) can lead to incorrect blending if drawn by the framework.

This method will not affect the behavior of a bitmap without an alpha channel, or if hasAlpha() returns false.

Convenience method for calling reconfigure(int, int, Config) with the current height and config.

WARNING: this method should not be used on bitmaps currently used by the view system, see reconfigure(int, int, Config) for more details.

Write the bitmap and its pixels to the parcel. The bitmap can be rebuilt from the parcel by calling CREATOR.createFromParcel().