AbstractCursor

If mRowIdColumnIndex is not -1 this contains contains the value of the column at mRowIdColumnIndex for the current row this cursor is pointing at.

This must be set to the index of the row ID column by any subclass that wishes to support updates.

Closes the Cursor, releasing all of its resources and making it completely invalid. Unlike deactivate() a call to requery() will not make the Cursor valid again.

Retrieves the requested column text and stores it in the buffer provided. If the buffer size is not sufficient, a new char buffer will be allocated and assigned to CharArrayBuffer.data

Deactivates the Cursor, making all calls on it fail until requery() is called. Inactive Cursors use fewer resources than active Cursors. Calling requery() will make the cursor active again.

Copies cursor data into the window.

Clears the window and fills it with data beginning at the requested row position until all of the data in the cursor is exhausted or the window runs out of space.

The filled window uses the same row indices as the original cursor. For example, if you fill a window starting from row 5 from the cursor, you can query the contents of row 5 from the window just by asking it for row 5 because there is a direct correspondence between the row indices used by the cursor and the window.

The current position of the cursor, as returned by getPosition(), is not changed by this method.

Returns the value of the requested column as a byte array.

The result and whether this method throws an exception when the column value is null or the column type is not a blob type is implementation-defined.

Return total number of columns

Returns the zero-based index for the given column name, or -1 if the column doesn't exist. If you expect the column to exist use getColumnIndexOrThrow(String) instead, which will make the error more clear.

Returns the zero-based index for the given column name, or throws IllegalArgumentException if the column doesn't exist. If you're not sure if a column will exist or not use getColumnIndex(String) and check for -1, which is more efficient than catching the exceptions.

Returns the column name at the given zero-based column index.

Returns a string array holding the names of all of the columns in the result set in the order in which they were listed in the result.

Returns the numbers of rows in the cursor.

Returns the value of the requested column as a double.

The result and whether this method throws an exception when the column value is null, the column type is not a floating-point type, or the floating-point value is not representable as a double value is implementation-defined.

Returns a bundle of extra values. This is an optional way for cursors to provide out-of-band metadata to their users. One use of this is for reporting on the progress of network requests that are required to fetch data for the cursor.

These values may only change when requery is called.

Returns the value of the requested column as a float.

The result and whether this method throws an exception when the column value is null, the column type is not a floating-point type, or the floating-point value is not representable as a float value is implementation-defined.

Returns the value of the requested column as an int.

The result and whether this method throws an exception when the column value is null, the column type is not an integral type, or the integer value is outside the range [Integer.MIN_VALUE, Integer.MAX_VALUE] is implementation-defined.

Returns the value of the requested column as a long.

The result and whether this method throws an exception when the column value is null, the column type is not an integral type, or the integer value is outside the range [Long.MIN_VALUE, Long.MAX_VALUE] is implementation-defined.

Return the URI at which notifications of changes in this Cursor's data will be delivered, as previously set by setNotificationUri(ContentResolver, Uri).

Returns the current position of the cursor in the row set. The value is zero-based. When the row set is first returned the cursor will be at positon -1, which is before the first row. After the last row is returned another call to next() will leave the cursor past the last entry, at a position of count().

Returns the value of the requested column as a short.

The result and whether this method throws an exception when the column value is null, the column type is not an integral type, or the integer value is outside the range [Short.MIN_VALUE, Short.MAX_VALUE] is implementation-defined.

Returns the value of the requested column as a String.

The result and whether this method throws an exception when the column value is null or the column type is not a string type is implementation-defined.

Returns data type of the given column's value. The preferred type of the column is returned but the data may be converted to other types as documented in the get-type methods such as getInt(int), getFloat(int) etc.

Returned column types are

• FIELD_TYPE_NULL
• FIELD_TYPE_INTEGER
• FIELD_TYPE_FLOAT
• FIELD_TYPE_STRING
• FIELD_TYPE_BLOB

onMove() will only be called across processes if this method returns true.

If the cursor is backed by a CursorWindow, returns a pre-filled window with the contents of the cursor, otherwise null.

Returns whether the cursor is pointing to the position after the last row.

Returns whether the cursor is pointing to the position before the first row.

return true if the cursor is closed

Returns whether the cursor is pointing to the first row.

Returns whether the cursor is pointing to the last row.

Returns true if the value in the indicated column is null.

Move the cursor by a relative amount, forward or backward, from the current position. Positive offsets move forwards, negative offsets move backwards. If the final position is outside of the bounds of the result set then the resultant position will be pinned to -1 or count() depending on whether the value is off the front or end of the set, respectively.

This method will return true if the requested destination was reachable, otherwise, it returns false. For example, if the cursor is at currently on the second entry in the result set and move(-5) is called, the position will be pinned at -1, and false will be returned.

Move the cursor to the first row.

This method will return false if the cursor is empty.

Move the cursor to the last row.

This method will return false if the cursor is empty.

Move the cursor to the next row.

This method will return false if the cursor is already past the last entry in the result set.

Move the cursor to an absolute position. The valid range of values is -1 <= position <= count.

This method will return true if the request destination was reachable, otherwise, it returns false.

Move the cursor to the previous row.

This method will return false if the cursor is already before the first entry in the result set.

This function is called every time the cursor is successfully scrolled to a new position, giving the subclass a chance to update any state it may have. If it returns false the move function will also do so and the cursor will scroll to the beforeFirst position.

Register an observer that is called when changes happen to the content backing this cursor. Typically the data set won't change until requery() is called.

Register an observer that is called when changes happen to the contents of the this cursors data set, for example, when the data set is changed via requery(), deactivate(), or close().

Performs the query that created the cursor again, refreshing its contents. This may be done at any time, including after a call to deactivate(). Since this method could execute a query on the database and potentially take a while, it could cause ANR if it is called on Main (UI) thread. A warning is printed if this method is being executed on Main thread.

This is an out-of-band way for the the user of a cursor to communicate with the cursor. The structure of each bundle is entirely defined by the cursor.

One use of this is to tell a cursor that it should retry its network request after it reported an error.

Specifies a content URI to watch for changes.

Unregister an observer that has previously been registered with this cursor via registerContentObserver(ContentObserver).

Unregister an observer that has previously been registered with this cursor via registerContentObserver(ContentObserver).

This function throws CursorIndexOutOfBoundsException if the cursor position is out of bounds. Subclass implementations of the get functions should call this before attempting to retrieve data.

Invoked when the garbage collector has detected that this instance is no longer reachable. The default implementation does nothing, but this method can be overridden to free resources.

Note that objects that override finalize are significantly more expensive than objects that don't. Finalizers may be run a long time after the object is no longer reachable, depending on memory pressure, so it's a bad idea to rely on them for cleanup. Note also that finalizers are run on a single VM-wide finalizer thread, so doing blocking work in a finalizer is a bad idea. A finalizer is usually only necessary for a class that has a native peer and needs to call a native method to destroy that peer. Even then, it's better to provide an explicit close method (and implement Closeable), and insist that callers manually dispose of instances. This works well for something like files, but less well for something like a BigInteger where typical calling code would have to deal with lots of temporaries. Unfortunately, code that creates lots of temporaries is the worst kind of code from the point of view of the single finalizer thread.

If you must use finalizers, consider at least providing your own ReferenceQueue and having your own thread process that queue.

Unlike constructors, finalizers are not automatically chained. You are responsible for calling super.finalize() yourself.

Uncaught exceptions thrown by finalizers are ignored and do not terminate the finalizer thread. See Effective Java Item 7, "Avoid finalizers" for more.

Subclasses must call this method when they finish committing updates to notify all observers.